Official NuTyX forums

Help => Installation => Topic started by: aarn on Wed Jan 18 04:57:54 2017

Title: install of 8.2.1 or 8.2.93 hangs at configuring network card
Post by: aarn on Wed Jan 18 04:57:54 2017
Hi,
I created bootable usbs (using sudo dd ...) successfully. Trying to install to laptop dell latitude E6230 with 8Gb RAM and 120 Gb ssd.  Installation goes well (either creating a boot partition, or not) with both usbs... but hangs at network card configuration. It 'sees' two cards, but refuses the w.... card which is present on the laptop, rather tries to select a second option (which I am not sure is present). The only way (that I know of) to exit from failed installation is to kill the machine with the power button. ctrl + alt +del does nothing. Suggestions please... thanks in advance, AA
Title: Re: install of 8.2.1 or 8.2.93 hangs at configuring network card
Post by: Thierry on Wed Jan 18 11:19:10 2017
Hello aarn,

Welcome to the forums.

I beleave the fact that you have two networks cards could be the reason.

I would need some info about your hardware.
Could you post here the result of lspci command (by using any liveUSB distribution)

Is it getting stuck when you have this picture ?

(http://downloads.tuxfamily.org/nutyx/img/saravane/install/en/ConfigureEth0.png)


Title: Re: install of 8.2.1 or 8.2.93 hangs at configuring network card
Post by: aarn on Wed Jan 18 21:22:31 2017
Hello and thanks for your interest. On that laptop is now installed a system built from ubuntu-mini and lxde. The output from lspci is listed at the foot of this response (enclosed in <...>).

The installation hung before 'Configuration of eth0' dialogue box, from memory the box was headed 'Configuration of network card'. I guess I could try creating live installation usb from another brand of stick. Cheers aarn

<$ lspci
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
00:1c.3 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 (rev c4)
00:1c.5 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 6 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation QM77 Express Chipset LPC Controller (rev 04)
00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
02:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 [Taylor Peak] (rev 34)
0b:00.0 SD Host controller: O2 Micro, Inc. OZ600FJ0/OZ900FJ0/OZ600FJS SD/MMC Card Reader Controller (rev 05)>
 
Title: Re: install of 8.2.1 or 8.2.93 hangs at configuring network card
Post by: aarn on Thu Jan 19 07:03:59 2017
Hi,
sorry for all this. I didn't realise that it is possible to select network cards by hitting <spacebar>. Linux newbie hahaha
Title: Re: install of 8.2.1 or 8.2.93 hangs at configuring network card
Post by: Thierry on Thu Jan 19 11:41:19 2017
No prob, I'm glad you found the prob
Title: Re: install of 8.2.1 or 8.2.93 hangs at configuring network card
Post by: Murasashiko on Mon Oct 02 09:33:39 2017
This is not a thread for asking to join. You are meant to make your own below