Installation issue with NuTyx xfce version

[Batmanxx1]

please will the command sudo dd if=NuTyX_x86_64-22.07.0-XFCE4.iso of=/dev/<name_of_your_key> status=progress,  also erase the content if there is anything on the usb key ?

[Batmanxx1]

sudo dd if=NuTyX_x86_64-22.07.0-XFCE4.iso of=/dev/<name_of_your_key> status=progress    will this command also erase if there anything on the usb key ilike rufus does for example or do I need another tool to format the usb first ?

[Thierry]

the command sudo dd if=NuTyX_x86_64-22.07.0-XFCE4.iso of=/dev/<name_of_your_key> status=progress,  also erase the content

Yes

do I need another tool to format the usb first

No

[Batmanxx1]

when I typed in sudo lsblk -S this is what came out so please the usb is the kingston data traveller what is the correct line to input into the terminal in order to copy the iso onto the usb key ?
any help please

$ sudo lsblk -S
[sudo] password di giuseppe:
NAME HCTL       TYPE VENDOR   MODEL             REV TRAN
sda  11:0:0:0   disk Kingston DataTraveler_3.0     PMAP usb
sdb  5:0:0:0    disk ATA      SSD_256GB                 0326 sata

[Batmanxx1]

Kindly and advice on what to do Thank you

[Thierry]

You USB key is located at /dev/sda:

"sda  11:0:0:0   disk Kingston DataTraveler_3.0     PMAP usb"

Code: [Select]

sudo dd if=NuTyX_x86_64-22.07.0-XFCE4.iso of=/dev/sda status=progress
Support have some limits here as you do not know what you are doing I'm affraid.

BR,
Thierry

[Batmanxx1]

Good Morning
so I just need to copy this line below into the terminal ? and the process just start to copy to iso on the usb key?


sudo dd if=NuTyX_x86_64-22.07.0-XFCE4.iso of=/dev/sda status=progress

[Batmanxx1]

I wanted to ask you on pc without Windows or any linux distro by downloading first the iso on a usb key  for kde5 or xfce will it work ?

[Thierry]

No, will not work

[Batmanxx1]

Hi  it took nearly two hours to complete  onto the usb key by using sudo dd if=NuTyX_x86_64-22.07.0-XFCE4.iso of=/dev/sda status=progress but it will not install always the same error:

Starting initrd
10.1274491 /dev/loopO:Can't open blockdev
starting version 246

Any help is grealty appreciated

[Batmanxx1]

Kindly any help I even tried with the base version always the same problem

[Thierry]

Probably your hardware is not support by NuTyX.

Can?t fix that so easily.

Thanks for been trying

[Batmanxx1]

but this is the first time this happened all other distro iso I tired non even of them failed.