Recent Posts

Pages: 1 ... 3 4 [5] 6 7 ... 10
41
Cards: The Package Manager / Re: weird result for command "cards list <string>
« Last post by Thierry on Fri Jul 29 08:06:08 2022 »
Definitely something wrong.

I would need your install history:

cat /var/log/install.log|paste-nutyx

I away for few days won?t be able to answer too much
42
Installation / Re: Installation issue with NuTyx xfce version
« Last post by Batmanxx1 on Fri Jul 29 07:06:44 2022 »
Kindly any help I even tried with the base version always the same problem
43
This post has no more relevance as it was for an openbox cards.conf and poor result
44
Hardware / Re: Unable to boot using AMD graphics
« Last post by aus9 on Fri Jul 29 04:11:27 2022 »
installed into a spare partition and currently using a chainloader to get to grub menu

I have done something wrong as it then hanged with a msg of respawn after 5 minutes ....I waited and it repeated.

So I booted into other distro -> chroot and commented out the line in /etc/inittab for the xdm-nutyx
I also installed via chroot a number of packages including the amdgpu video driver and lightdm, as I am used to lightdm and not lxdm

but on reboot...only gave me a console prompt. I have to relearn sysV!

anyhow started lightdm and we have success

Code: [Select]
uname -r                                                                                          [13:54 x86_64 5.18.14-NuTyX gor@gor]
5.18.14-NuTyX
gor [ ~ ]$ pinxi -Gxxx
Graphics:
  Message: No device data found.
  Display: server: X.org v: 1.21.1.4 driver: X: loaded: amdgpu
    unloaded: modesetting failed: vesa alternate: fbdev gpu: N/A display-ID: :0
    screens: 1
  Screen-1: 0 s-res: 1920x1080 s-size: <missing: xdpyinfo>
  Monitor-1: HDMI-A-0 res: 1920x1080 hz: 60 dpi: 102
    size: 480x270mm (18.9x10.63") diag: 551mm (21.68") modes: N/A
  Message: Unable to show GL data. Required tool glxinfo missing.

EDIT this is a grub2 entry installed into the PBR of sda3, I will modify it to make it explicit now.
I actually use another distro with grub2 in MBR chainloading to NuTyx

grub2 menu now reads
Quote
menuentry "NuTyX Quiet" {
  set root=(hd0,msdos3)
   linux /boot/kernel-stable root=/dev/sda3 ro quiet mem_encrypt=off
   initrd /boot/initrd-stable
}

EDIT
A simple edit of /etc/inittab and reboot gave me lightdm
Quote
x:5:respawn:/usr/bin/lightdm
45
Hardware / Re: Unable to boot using AMD graphics
« Last post by aus9 on Fri Jul 29 01:32:37 2022 »
the kernel module tricked me....

Openbox iso does not have the amdgpu video driver installed.

I had to, using root powers
Code: [Select]
cards install xorg-xf86-video-amdgpu
  xorg-xf86-video-amdgpu 22.0.0-1   59.64 KB (73.16 KB/s) 100 % - 0 s
Retrieve info about the 435 packages: 100 %
   ADD: (gui) xorg-xf86-video-amdgpu 22.0.0-1, 10 files: 100 %[11:12 x86_64 5.18.14-NuTyX root@gor]
post-install: start
  /sbin/ldconfig -r /
post-install: finish

this conflicts with package list that claims that
 xorg-xf86-video-amdgpu 22.0.0   is installed.
ref
https://distrowatch.com/table.php?distribution=nutyx&pkglist=true&version=22.07.0#pkglist

I do not enough about cards or this distro.....as to what packages to what distro desktop were listed at distrowatch.

My fault for not checking....and this will resolve, hopefully if I do an install and then reboot to check
46
Installation / Re: Installation issue with NuTyx xfce version
« Last post by Batmanxx1 on Thu Jul 28 14:30:51 2022 »
Hi  it took nearly two hours to complete  onto the usb key by using sudo dd if=NuTyX_x86_64-22.07.0-XFCE4.iso of=/dev/sda status=progress but it will not install always the same error:

Starting initrd
10.1274491 /dev/loopO:Can't open blockdev
starting version 246

Any help is grealty appreciated
47
Hardware / Re: Unable to boot using AMD graphics
« Last post by Thierry on Thu Jul 28 09:42:33 2022 »
Nice job.

Many thanks for yours inputs.

BR,
Thierry

48
Hardware / Re: Unable to boot using AMD graphics
« Last post by aus9 on Thu Jul 28 09:07:31 2022 »
OK with that bootcode....vga=ask and no quiet.....things have changed.....change is good  ;D

Before change we had
pinxi -Gxxx
Graphics:
  Message: No PCI device data found.
  Display: server: X.org v: 1.21.1.4 driver: X: loaded: N/A
    unloaded: fbdev,modesetting,radeon failed: vesa gpu: N/A display-ID: :0
    screens: 1
  SNIP

Now I have modesetting driver
]pinxi -Gxxx
Graphics:
  Message: No device data found.
  Display: server: X.org v: 1.21.1.4 driver: X: loaded: modesetting
    unloaded: fbdev failed: vesa alternate: amdgpu gpu: N/A display-ID: :0
    screens: 1
  .

amdgpu has "improved"

Code: [Select]
dmesg | grep amdgpu                               [18:55 x86_64 5.18.14-NuTyX root@gor]
[   26.381957] [drm] amdgpu kernel modesetting enabled.
[   26.501434] amdgpu: Topology: Add APU node [0x0:0x0]
[   26.812217] amdgpu 0000:26:00.0: vgaarb: deactivate vga console
[   26.812352] amdgpu 0000:26:00.0: amdgpu: Trusted Memory Zone (TMZ) feature enabled
[   26.840327] amdgpu 0000:26:00.0: amdgpu: Fetched VBIOS from ROM BAR
[   26.840332] amdgpu: ATOM BIOS: 113-PICASSO-118
[   26.840625] amdgpu 0000:26:00.0: amdgpu: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used)
[   26.840630] amdgpu 0000:26:00.0: amdgpu: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
[   26.840634] amdgpu 0000:26:00.0: amdgpu: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF
[   26.840674] [drm] amdgpu: 2048M of VRAM memory ready
[   26.840677] [drm] amdgpu: 3072M of GTT memory ready.
[   26.848056] amdgpu 0000:26:00.0: amdgpu: PSP runtime database doesn't exist
[   26.848090] amdgpu: hwmgr_sw_init smu backed is smu10_smu
[   26.858837] amdgpu 0000:26:00.0: amdgpu: Will use PSP to load VCN firmware
[   26.948864] amdgpu 0000:26:00.0: amdgpu: RAS: optional ras ta ucode is not available
[   26.953866] amdgpu 0000:26:00.0: amdgpu: RAP: optional rap ta ucode is not available
[   26.991158] snd_hda_intel 0000:26:00.1: bound 0000:26:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[   27.034311] kfd kfd: amdgpu: Allocated 3969056 bytes on gart
[   27.062555] amdgpu: HMM registered 2048MB device memory
[   27.062635] amdgpu: Topology: Add APU node [0x15d8:0x1002]
[   27.062642] kfd kfd: amdgpu: added device 1002:15d8
[   27.062871] amdgpu 0000:26:00.0: amdgpu: SE 1, SH per SE 1, CU per SH 11, active_cu_number 8
[   27.062986] amdgpu 0000:26:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0
[   27.062991] amdgpu 0000:26:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0
[   27.062995] amdgpu 0000:26:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0
[   27.062999] amdgpu 0000:26:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0
[   27.063003] amdgpu 0000:26:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0
[   27.063007] amdgpu 0000:26:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0
[   27.063011] amdgpu 0000:26:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0
[   27.063015] amdgpu 0000:26:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0
[   27.063018] amdgpu 0000:26:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0
[   27.063022] amdgpu 0000:26:00.0: amdgpu: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
[   27.063026] amdgpu 0000:26:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 1
[   27.063030] amdgpu 0000:26:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 1
[   27.063034] amdgpu 0000:26:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 1
[   27.063038] amdgpu 0000:26:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 1
[   27.063041] amdgpu 0000:26:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 1
[   27.069934] [drm] Initialized amdgpu 3.46.0 20150101 for 0000:26:00.0 on minor 0
[   27.073617] fbcon: amdgpudrmfb (fb0) is primary device
[   27.121729] amdgpu 0000:26:00.0: [drm] fb0: amdgpudrmfb frame buffer device

suggest we mark this as solved.

As I appear to be the only with an APU, I will in the next few days remaster the openbox iso to
A) change my bootcodes
B) Maybe add some stuff like alsa-utils binutils and so on

I am not yet ready to think of installing....so do not use a virtual machine.

Thanks for reading


49
Hardware / Re: Unable to boot using AMD graphics
« Last post by aus9 on Thu Jul 28 08:49:43 2022 »
going to reboot to try bootcode
Quote
mem_encrypt=off
50
Hardware / Re: Unable to boot using AMD graphics
« Last post by aus9 on Thu Jul 28 08:33:04 2022 »
I may have found something regarding the error msg
 SME is not compatible with RAVEN

https://lists.freedesktop.org/archives/amd-gfx/2021-October/069868.html

Quote
and the AMDGPU graphics driver, despite being loaded, does not work, and the framebuffer driver
is used instead.

our config file shows
CONFIG_AMD_MEM_ENCRYPT=y
CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT=y
Pages: 1 ... 3 4 [5] 6 7 ... 10